| V I S U A L I Z Z A D I S C U S S I O N E |
| Nicola Svizzera |
Posted - 01 lug 2013 : 18:37:15
salute
Im searching for some informations for the dansi ignition parts.
does anybody know if theres the same parts by similar scooters or motorcycles.
or does somebody knows the original numbers of the dansi parts (condenser,coils, ignition coil, point contacts. Or some dates of the ohmic resistance.
thank you
Nicola |
| 9 U L T I M E R I S P O S T E (in alto le più recenti) |
| Nicola Svizzera |
Posted - 05 ago 2013 : 20:10:06
http://www.fodone.com/6202.htm |
| Nicola Svizzera |
Posted - 05 ago 2013 : 20:09:11
http://item.mobileweb.ebay.com/viewitem?itemId=230892206858 |
| Nicola Svizzera |
Posted - 05 ago 2013 : 20:06:51
And the condenser is: I think the right one
Dansi 5019
image.jpg
 _ _ |
| Iso |
Posted - 05 ago 2013 : 13:02:19
Very good.
Rarely the platinum points have to change.
Usually replaced the condenser.
Ciao da Gigi. |
| Nicola Svizzera |
Posted - 05 ago 2013 : 12:29:48
Hello.
I found the contact points.
http://www.fodone.com/2470.htm |
| ricca |
Posted - 10 lug 2013 : 09:37:54
You are probably right, I bought my contact from a Casalambretta dealer assuming that were parts of their catalogue but probably not the same are however avaialable by effe Torino take a look here http://www.fodone.com/fodone.asp
riccardo |
| Nicola Svizzera |
Posted - 09 lug 2013 : 18:09:16
Hi riccardo.
are you sure that the contact points from casa lambretta fit the iso diva?
it seems that they are Mirror inverted. I mean the flywheel of the lambretta is on the left side and their from iso iso on the right side. They have different turns. Am i wrong?
At luigi:
i have the old coils. But thay are a lot of dansi coils in the internet. Thats beacause a asked you for the dansi number.
Ps here in switzerland is very expensive to refit the old parts.
Salute
Nicola |
| ricca |
Posted - 04 lug 2013 : 09:09:04
hello Nicola
refering to the point contact , suggest to download the CasaLambretta Catalogue 2013 from the web site they have avaiable the contacts that can be used for your Diva (page 96 i think) while for the condenser you can use the same of the Vespa dont' remeber if the same model of sprint veloce/t.s. or primavera . no Ideas for the coils . Best regards
riccardo |
| Iso |
Posted - 03 lug 2013 : 23:39:59
Are these parts missing on your Iso?
Ciao da Gigi. |
